O is a series of through-body porcelain tile inspired by the automotive world. The collection is based on the geometric patterns of the air intakes in the Giugiaro Parcour model and the texture of carbon fiber, resulting in a balance between smooth and textured surfaces. Tiles are available in three tones of black and gray.
Colors + Sizes
The collection is comprised of 3 colors (HGA 5 - Grey, HGA 15 - Dark Grey and HGA 18 - Black), offered in 3 finishes (Natural, Air Intake and Carbon Fiber) and various sizes.
Tiles in the Natural and Carbon Fiber finishes are available in the following nominal (and actual) sizes: 6"x24" (5.91"x23.62"), 12"x24" (11.81"x23.62"), 24"x24" (23.62"x23.62") and 24"x48" (23.62"x47.24"). Tiles in the Air Intake finish are available in the following nominal (and actual) sizes: 12"x24" (11.81"x23.62"), 24"x24" (23.62"x23.62") and 24"x48" (23.62"x47.24").
Mosaics are offered in a mix of the Natural and Carbon Fiber finishes, available in the following nominal (and actual) sheet size: 12"x12" (11.81"x11.81").
Tiles are rectified and mono-caliber.
The GA Collection is suitable for interior and exterior walls and floors, including heavy commercial traffic flooring.
This collection is shipped with one Giugiaro Signature Tile per every 110 sf. The Giugiaro Signature Tile includes a subtle stamp identifying the designer of the collection. If this tile is not desired, the INSTALLER MUST BE INFORMED to remove the signature tile from the selection.
AN IMPORTANT NOTE ABOUT STONE & TILE SIZES:
Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual. This is a general rule of thumb when selecting natural stone or porcelain tile from any resource.
Typically, the sizes shown are NOMINAL, not ACTUAL. This means that the tile size will vary slightly from material to material.
I.e. If a material is noted as being a 12" x 24" tile, it is typically a tile that is actually 30 cm x 60 cm. The actual size would then be 11.811" x 23.622". An industry rule of thumb is to round to the nearest whole number. To ensure that you have enough material for any project, it is always advisable to order a small overage of 10-15% more than is required.
Samples are to be used as a general guide. Pattern and shade may vary. Sizes are nominal, not actual.
A NOTE ABOUT PORCELAIN TILE AND CERAMIC TILE: