ELECTRA GRANDE LIGHTNING
13.5" X 15.5"
This material is priced per square foot.
Each piece of tile is 1.12 sf.
Must purchase by full boxes of tile (10.07 sf/box).
Electra Grande is a series of glazed porcelain tile with printing applications and a unique geometric appearance. The collection is inspired by encaustic cement tile and has a slightly patinaed look, rather than having consistent, bold coloring throughout each piece. Tiles are oversized hexagons (approximately 13.5” X 15.5") with lines projecting across the surface. Once the material is installed, the lines create a geometric pattern of their own. Tiles can be installed to form various patterns for floor and wall.
Colors, Finishes & Sizes
Electra Grande is available in five colors (Lightning, Neptune, Mercury, Midnight and Green Galaxy), in a Matte finish in a thickness of 9mm in the following nominal size: 13.5” X 15.5"
Each piece of tile is 1.12 sf and is priced per square foot. Must purchase by full boxes of tile (10.07 sf/box)
Tiles are not rectified and not mono-caliber.
Electra Grande is suitable for interior and exterior walls and interior floors, including heavy-traffic commercial flooring applications.
Installation & Maintenance
Tiles can be installed using standard installation methods for thinset adhesives. A grout joint of 1/8" or greater is recommended. Use high quality adhesive from manufacturers such as Laticrete and Mapei, following manufacturers’ recommendations, depending on conditions. Clean with a neutral detergent.
Sample orders are limited to 1 per customer.
AN IMPORTANT NOTE ABOUT STONE & TILE SIZES:
Product photography and samples are to be used as a general guide. Color as well as percentage, size and shape of markings will vary. Sizes are nominal, not actual. This is a general rule of thumb when selecting natural stone or porcelain tile from any resource.
Typically, the sizes shown are NOMINAL, not ACTUAL.
This means that the tile size will vary slightly from material to material.
I.e. If a material is noted as being a 12" x 24" tile, it is typically a tile that is actually 30 cm x 60 cm. The actual size would then be 11.811" x 23.622". An industry rule of thumb is to round to the nearest whole number. To ensure that you have enough material for any project, it is always advisable to order a small overage of 10-15% more than is required.
A NOTE ABOUT PORCELAIN TILE AND CERAMIC TILE:
Samples are to be used as a general guide. Pattern and shade may vary. Sizes are nominal, not actual.